Specifications

17 ATTO Technology Inc. ATTO ExpressSAS Host & RAID Adapter Installation and Operation Manual
Installing CacheAssure (6Gb RAID Adapters only)
Adding CacheAssure to your Host Adapter (marked ‘A’ in Exhibit 3-1) requires the installation of two modules;
Non-Volatile Memory Card (B) and Power Module (C).
WARNING
ATTO CacheAssure modules and Host
Adapters contain components that are
sensitive to electrostatic discharge (ESD).
ESD can cause damage to the ATTO
ExpressSAS host adapter. Please follow
standard methods to avoid ESD.
Exhibit 3-1 ESAS RAID Adapter with CacheAssure
Non-Volatile (NV) Memory Card Installation
-----------------------------------------------------------------------
1 Power down the computer and unplug the
computer from all power sources.
2 Open the case.
If you have purchased the ESAS RAID
Adapter bundled with CacheAssure, the NV
Memory Card is pre-assembled to the RAID
Host Adapter. If so, please go directly to the
Power Module Installation section. If you
are adding CacheAssure to a previously
purchased SAS RAID Adapter, continue to
step 3.
3 Gently remove your ATTO 6Gb SAS Adapter
from the PCI Express expansion slot. If you
have questions about how to remove an
expansion card from your system, consult your
computer’s documentation.
4 Remove the NV Memory Card from its
electrostatic safe packaging.
-----------------------------------------------------------------------
5 Holding the RAID adapter firmly, plug the NV
Memory Card into the RAID Host Adapter with
ATTO logos in matching direction and the
standoff mounts closer to the adapter’s bracket.
See Exhibit 3-2
.
Exhibit 3-2 NV Memory Card Installation
CAUTIONCAUTION
Make sure the NV Memory Card is evenly
aligned on both sides. If the card is
placed incorrectly, damage to the
Memory or Host Adapter Card may occur.
This may void your warranty.