Specifications

6 ATTO Technology Inc. ATTO ExpressSAS Host & RAID Adapter Installation and Operation Manual
2 Install Drivers
ATTO ExpressSAS host adapters require a current device driver and hardware flash for proper operation.
Your adapter was properly flashed before shipment.
However, you must add ExpressSAS drivers to your
computer before continuing with installation.
If you already have one or more ExpressSAS adapters
installed and you have the latest drivers found on the
ATTO web site, or you followed the instructions in the
Getting Started Guide, you do not need to perform
any
of these procedures.
Drivers for Windows, OS X and Linux are supplied on
the Installation CD and on the ATTO web site.
Exhibit 2-1 The Installation CD splash screen. for the ExpressSAS RAID host adapter.
Downloading drivers from the ATTO website
Use this procedure if you need to update drivers. The
latest driver for your adapter can be found on the
ATTO website.
1Go to www.attotech.com.
2 On the splash screen menu, put your cursor
over Downloads then click on Product
Downloads.
3 Register or log in if previously registered.
4Select SAS/SATA Host & RAID Adapters
from the product list.
5 Select your model.
6 From the table, find your Operating System.
7 Click on the entry for the latest driver.
8 A download window appears. Follow the
instructions for downloading the driver.
Internet Explorer users may select Run to
automatically run the downloaded self-
extracting executable file.
All other browser users select a download
destination and run the self-extracting
executable file.
9 Continue with the driver installation as
described on the following pages for your
Operating System.