Datasheet

10GbE FCoE Converged Network Adapters
FastFrame™ CS14, CS12, CS11
Tech Sheet
11/11
Product features and specifications are subject to change without notice.
Applications
FastFrame™ 10GbE FCoE Converged Network Adapters combine the unparalleled performance of 10 Gigabit Ethernet, the lossless benefits of Enhanced Ethernet, and the
robustness of Fibre Channel over Ethernet (FCoE) built on field proven Fibre Channel technology to meet the performance and economic needs of today’s growing data
centers. FastFrame CNAs enable storage traffic to be directly carried over Ethernet alongside networking traffic, delivering a single connectivity solution for high bandwidth
LAN and SAN applications.
Ethernet Features
▪ Intel Ethernet Controller #82599
▪ Data rate per port: 10Gb/s
▪ Jumbo frame support up to 9,000 bytes
▪ Tx/Rx IP, TCP & UDP checksum offloading
(IPv4, IPv6) capabilities, Transmission control
protocol (TCP), User datagram protocol
(UDP), Internet protocol (IP)
▪ Tx/TCP segmentation offload, Large send
offloads (LSO)
▪ Data Center Bridging (DCB) support
-
Priority-Based Flow Control 802.1Qbb rev.0
-Enhanced Transmission Selection 802.1Qaz rev.0
-Data Center Bridging (DCBX) protocol
▪ Low latency interrupts
▪ Ability to create multiple VLAN segments
Network Standards
▪ IEE802.3ae: 10GBASE-SR, 10GBASE-LR
▪ SFF-8431: 10GSFP+Cu (a.k.a Direct Attach)
▪ 802.1 Qbb: Priority Flow Control
▪ 802.1 Qaz: Enhanced Transmission
▪ DCBX Protocol
FCoE Features
▪ Concurrent Logins 2048
▪ Active Exchanges/port 2048
▪ FC Class 3 support
▪ Protocol - FCP (SCSI-FCP)
▪ 400,000 IOPS per port
▪ FC-FDMI
▪ FC-GS-2/3/4
▪ FC-FS
▪ FCoE Initialization Protocol (FIP) Version 1
Bus Specifications
▪ x8 PCI Express 2.0
▪ Supports PCI Express Base 2.0 and
CEM Spec 2.0
External Connectivity
▪ 10Gb Four, two or one LC fiber-optic
connectors
▪ Supports 10Gb SFP + Cu for Direct Attach
▪ 2 LED indicators per port
▪ LED Indicators: LINK (solid), ACTIVITY
(blinking), LINK SPEED (green = 10Gb,
yellow = 1Gb)
User Benefits
▪ Low total cost of ownership (TCO) with the
ability to route LAN and SAN traffic over a
single fabric
▪ Multi-protocol support (FCoE, iSCSI, TCP/IP)
for flexible and easily scalable connectivity
▪ Multiple offloads for lower processor usage
and increased throughput
▪ Reduced power, cooling and cabling costs
▪ Simplified management console for
network and storage infrastructure
Operating System Support
▪ Windows® Server 2003, 2008, 2008 R2
▪ Windows XP, Vista, 7
▪ Red Hat (RHEL) and SUSE (SLES) Linux
▪ Mac OS® X 10.6 and later
Environmental and Physical
Specifications
▪ Operating environment: 0°C to 55°C (32°F to
131°F)
▪ Non operating environment: -40°C to 70°C
(-40°F to 157°F)
▪ Airflow required: 100 lf/m
▪ Humidity: 5% to 95% non-condensing
▪ Power Consumption
FFRM-CS14: 15.7W
FFRM-CS12: 5.9W
FFRM-CS11: 4.7W
Agency Approvals
▪ FCC Part 15 Subpart B
▪ EN55022: 2006 + A1: 2007, Class B
▪ EN55024: 1998 + A1: 2001 & A2: 2003
Compliance
▪ EN60950-1: 2001, IEC 60950-1: 2001
▪ EN60825-1: 2007, IEC 60825-1: 2007
▪ EN60825-2: 2004, IEC 60825-2: 2004
▪ RoHS
Management Tools
▪ ATTO Config Tool management and
configuration utility
Warranty
▪ 3 Year
Ordering Information
Phone: [phone]
Quad Port: FFRM-CS14-000
Dual Port: FFRM-CS12-000
Single Port: FFRM-CS11-000
TTO ATTO
Technical Specifications
attotech.com
716.691.1999
ATTO FastFrame CS11
Ports
Single Port
Bus Characteristics
x8 PCIe 2.0
Form Factor
Low Profile
Transfer Rate
2.5GB/s (Full duplex)
Part Number
FFRM-CS11-000
Connector
Optical LC SFP+
ATTO FastFrame CS12
Ports
Dual Port
Bus Characteristics
x8 PCIe 2.0
Form Factor
Low Profile
Transfer Rate
5GB/s (Full duplex)
Part Number
FFRM-CS12-000
Connector
Optical LC SFP+
ATTO FastFrame CS14
Ports
Quad Port
Bus Characteristics
x8 PCIe 2.0
Form Factor
Full Height
Transfer Rate
8GB/s (Full duplex)
Part Number
FFRM-CS14-000
Connector
Optical LC SFP+