User`s guide

800001 rev K1 Huge Media Vault - Max User’s Guide Page 11 of 26
Reset Button
The Reset Buttons are located below the SCSI ID and Mode Select switch quadrant.
SCSI ID / Mode Select
⊗ ⊗
Reset
The Reset Button is used in conjunction with the Mode Select option. See the Mode Select section.
SCSI connections
The Huge Media Vault have a pair of SCSI 68-pin high density connectors. They function as an IN and an
OUT connection with internal loop-through for the SCSI channel. This SCSI channel is compatible with
Ultra160 (LVD – Low Voltage Differential) at 160 MBytes/sec, Ultra2 (LVD) at 80MBytes/sec, and other
SCSI standards. HVD (High Voltage Differential) is not supported.
SCSI IN
SCSI OUT
Host connections
Use a Ultra160 rated SCSI cable to connect the SCSI channel to your host computer. Connect the SCSI IN
of the Huge Media Vault to the SCSI channel in the computer.
Terminator
Use a Ultra160 rated SCSI terminator to terminate the SCSI connection. Connect the terminator to SCSI
OUT.
Huge Media Vault
Editing Computer
SCSI IN
SCSI OUT SCSI
Host SCSI connections and terminations
Install
Terminator