Product specifications

4-17
Installing the Avid Board Set
Installing the Meridien III-U Digital Media Board Set
The Avid Meridien III-U digital media board set contains the
Meridien II digital media board with attached Meridien III-U daughter
board (see Figure 4-6). These boards use one slot and should be placed
into the system as one board.
Install the completed Meridien III-U (or Meridien III) digital media
board set into the recommended PCI slot reflected in the appropriate
product board configuration table.
The device driver is installed when the Avid editing product is
installed.
Figure 4-6 Avid Meridien III-U Digital Media Board Set
n
The Meridien III-U (or Meridien III) board set connects to the Meridien
display controller board and to one of the two 3D DVE effects boards. The
connection to the display controller board uses a cable, Avid
PN 0070-00491-01, while the connection to the 3D DVE effects board uses a
new flexible over-the-top connector, Avid PN 0030-03062-01.
Cable to edit
3D interface
cable A
3D interface
cable B
display controller