Product specifications

4-11
Installing the Avid Board Set
Revision Levels
Table 4-6 shows the revision level of the storage drivers and BIOS
needed for the IBM 6866 system at the first release of the product.
Removing the AGP Graphics Board
The AGP graphics board supplied with the IBM 6866 system must be
removed when you install a Meridien display controller board. When
you remove the AGP graphics board, you must install the Meridien
display controller board before you turn on the system. Once the Avid
Windows 2000 editing application is installed, the display controller
board replaces the platform AGP graphics board and is used as the
active graphics board.
c
The AGP graphics board should be kept accessible to the system for
troubleshooting purposes. It should also be configured in the
"original" configuration during the boot procedure.
Table 4-6 Software Revision
Software Revision
BIOS IBM Z Pro 6866 PFJT37A minimum
Windows 2000 Service Pack 1
UL2D Driver PC V1.44uf0 (floppy disk is marked
1.45, but installs 1.44)
UL3D Driver PC V1.63U
F/C (Emulex) Driver V4-4.442a3; Firmware 3.03 a3