Product specifications

4-7
Avid Board Configurations
Avid Xpress Board Configurations
Table 4-4 defines the slots that the Avid board set must go into for any
Avid Xpress system. This table applies to local and shared-storage
environments.
Table 4-4 Avid Xpress Board Configurations
Slot Number/Type Avid Xpress System
1/AGP Remove the AGP board when you install the Avid
board set
2/PCI Free slot (no SCSI or F/C controllers)
3/PCI ICE option
4/PCI Meridien display controller board
5/PCI Genie effects board
6/PCI Meridien II digital media board set
a
7/PCI
b
Free slot, SCSI LVD controller or F/C controller
a. Avid can change from the Meridien II board set to the Meridien III
board set at any time. The only difference is the attached daughter
board.
b. If you need an F/C controller and a SCSI interface, you should use
slot 7 for the F/C controller and the external SCSI connection at the
rear of the system.