Product specifications

7-7
Installing Disk Controller Drivers
11. Click the Browse button, and browse to:
My Computer\CD-ROM drive letter\Upgradedrivers
\Emulex F/C Driver
12. Select OEMSETUP.inf, and then click Open.
13. Click OK in the Upgrade Device Driver Wizard.
14. Click Next.
The Digital Signature Not Found dialog box appears.
15. Click Yes.
The software installs (which might take a minute).
16. Click Finish, and then close the Emulex Properties window.
17. You might see a Welcome to Found New Hardware Wizard
(depending upon the hardware configuration) or a dialog box
stating that the system is installing a utility. If not, continue to
step 18.
Use the following procedure to step through the wizard and
disable the hardware. The utility is not needed and this stops the
wizard from appearing each time you boot the system.
To disable the hardware for the wizard:
a. Click Next in the Welcome to Found New Hardware Wizard.
The Install Hardware Devices Driver window opens.
b. Select “Search for a suitable driver for my device,” and then
click Next.
The Locate Driver Files dialog box appears.
c. Click Next.
The Driver Files Search Results window opens.
d. Select “Disable the device,” and then click Finish.
18. After you install the drivers for the Emulex controller, remove the
Avid application CD-ROM from the CD-ROM drive, and then
restart the system.