User`s guide

Chapter 5: Installing AVoption XL 25
Installing AVoption XL Video
Hardware
To install AVoption XLvideo hardware:
1 Unplug and open your Magma Expansion
Chassis according to the instructions included
with it.
2 Release any static electricity by touching the
power supply of the chassis, or another
grounded item.
3 Remove the Digital Media Board from the
anti-static bag, being careful to handle it only by
the edges.
4 Line up the Digital Media Board with the in-
stallation slot, and slide the card into place gen-
tly so the PCI connector is lined up with the PCI
slot.
5 Press down firmly on the card with even pres-
sure. The connector should click into place in
the PCI slot.
6 Close the computer or expansion chassis.
7 Attach the connector cable from the Digital
Media Board (connector labeled M) to the Com-
puter connector on the Meridien I/O Box.
PCI card alignment and installation
Connecting the Digital Media Board to the Breakout Box
REF
COMPOSITE
S-VIDEO
S-VIDEO
OUT 1
OUT 2
OUT
OUT
OUT 3
OUT
IN
OUT
B-Y
R-Y B-Y
R-Y
Y
Y
COMPONENT
COMPOSITE
ININ
IN / OUT
SYSTEM
LTC
IN
IN
MC