Product specifications

6-5

Installing the Windows NT Image

11. Press the Esc key to return to the Main menu.

Make sure there is no floppy disk in the floppy drive.

12. Insert the Avid Setup and Product Recovery CD-ROM into the

CD-ROM drive.

13. Press the Down Arrow key to reach Exit Setup and press Enter.

14. Save and exit the system BIOS settings as explained on the screen.

Installing the Windows NT Image

As the boot procedure continues the Avid Setup and Product Recovery

CD-ROM is booted.

You are placed in an MS-DOS

screen and receive the following four

choices when installing the Windows NT image:

• 1 — Perform a full recovery of the complete disk.

• 2 — Perform a partial recovery of only the C partition.

• 3 — Perform a partial recovery of only the D partition.

• 4 — Exit from the process without doing any recovery.

Depending upon the recovery selected, you should take the following

into consideration:

• You must reinstall the Avid software application after you perform

any recovery.

• If you select 1 or 2, all data on the C partition, including

applications installed after the system was built, will be destroyed.

• You should attempt to backup all data on drive D prior to using

partial recovery of only drive C in case something happens with

the drive itself (C and D are actually the same drive, just a

different partition).