Product specifications

4-21

Removing and Installing the Fan

This section explains how to remove and install the fan from the

IBM 6866 system. Before you start to remove or install the fan, you

must make sure of the following:

• The system was turned off in a proper manner.

• The power cord is removed from the rear of the system.

Removing the Fan

To remove the fan:

1. Press the Key-lock button on the left side of the front bezel, and

using the indented portion of the side cover, slide the side cover

toward the rear of the system (see Figure 4-10).

Figure 4-10 Removing the Side Cover

2. Lift the side cover from the system.

3. Lay the system on its right side.

4. Unplug the fan (see Figure 4-11).

Avid uses one of the six power plugs available for internal disks. This changes

the maximum number of internal 1.0-inch disks from six to five.

Key-lock button

Indented portion