Specifications

ii
CLI error messages
The following error messages may be returned by the Command line Interface:
ERROR. Invalid Command. Type 'Help' for command list.
ERROR. Wrong/Missing Parameters
Usage: <usage string>
ERROR Invalid RAID Group state
ERROR Invalid Block Device index
ERROR Invalid RAID Member index
ERROR Maximum number of RAID Groups exceeded
ERROR Insufficient number of RAID Group members
ERROR
Block Device at specified index no longer available
ERROR Insufficient RAID Group members for RAID type
CLI summary
The following chart summarizes the Command Line Interface commands, their defaults, and an example of how
to enter the commands. Commands which have no default values have a blank entry in that column of the table.
CAUTIONCAUTION
Do not use CLI unless you are directed to by an ATTO technician.
Changing parameters may cause loss of data and/or disruption to performance and reliability of
the FastStream.
The ExpressNAV Storage Manager is the preferred method to operate and manage the
FastStream. Refer to
Interface Options on page 27 for details.
Command Default Example
AutoMap automap
AutoResume rebuild =enabled
erase=disabled
set autoresume all disabled
BlockDevClean blockdevclean 30
BlockDevIdentify blockdevidentify alpha 3
BlockDevIDStop blockdevidstop
BlockDevScan blockdevscan
BridgeModel get bridgemodel
BridgeName “ “ set bridgename Omega6
ClearEventLog cleareventlog
Date set date 03/03/2003
DefaultInterleave 128 set defaultinterleave 64
DeleteAllMaps deleteallmaps
DHCPFixedDelay 0 set dhcpfixeddelay 10
DisplayEventLog displayeventlog
DisplayEventLogFilter all all all set displayeventlogfilter gen info all
DriveTest drivetest begin
DriveTestConfig set drivetestconfig read