Specifications

19
ATTO Technology Inc. FastStream SC Installation and Operation Manual
• Informational: information which you may
want to know but which probably does not
require action: only information messages
are sent
•
All: warnings, critical events and
informational messages are sent
•
None: no Emails are sent
You may send Emails to up to five Email addresses
and designate which conditions prompt each Email
notification.
For example, a recipient with a critical severity level
only receives critical messages and not warning or
informational messages.
When an event occurs that warrants Email notification,
the FastStream sends the message; it cannot respond
to a rejection by a server for an invalid address.
Ensure all Email addresses typed in are valid.
Each Email is time stamped when it is sent as part of
the SMTP header information.
1 If you are not already in the ExpressNAV
Storage Manager, type the IP address of your
appliance in a standard browser as found in
Using the ExpressNAV Storage Manager
on
page 27, click
Enter Here, type in your user
name and password, and click
OK.
2The
Health and Status Monitor page appears.
On the menu at the left hand side of the page,
choose
Manage.
3The
Manage Menu page appears. Click on the
FastStream arrow.
4 Click the
Set up Error Notification button.
5 Click
Next.
6 Click on the Enabled button for Notification
Configuration.
7 Type in the sender address or use the default.
(Emails show this name in the
From field)
8 Type or use the default SMTP Server (the
Email server) IP address or the name of the
SMTP server and, if required, the user name
and password used to log into the server.
9 Type in up to five Email addresses
10 Choose
All, Critical, Warning, Informational
or None
for each Email address.
11 When all information is typed in, click
Commit.
12 A warning box appears. In the warning box,
verify that you want to complete the notification
procedure including a restart of the FastStream
by clicking on
Yes. Clicking on No ends the
procedure without making a change.
13 Your settings are displayed. You may change
or disable Email notification at any time from
the
Error Notification page.
Identifying drive issues
New performance data is updated every 60 seconds
which impacts performance slightly, even if you
minimize the browser window. Exit the ExpressNAV
Storage Manager completely whenever you need
maximum performance.
Preliminary steps
1 If you are not already in the ExpressNAV
Storage Manager, type the IP address of your
appliance in a standard browser as found in
Using the ExpressNAV Storage Manager
on
page 27, click
Enter Here, type in your user
name and password, and click
OK.
2The
Health and Status Monitor page appears.
Click the
Diagnostics button on the left hand
menu.
3 Select the operation you wish to perform from
the next menu presented.