Specifications

17
ATTO Technology Inc. FastStream SC Installation and Operation Manual
6.0 Monitor Storage, Configurations
You may determine the performance of drives attached to the FastStream using various displays and tests in
ExpressNAV Storage Manager.
The following instructions assume you have already
set up at least one RAID group.
The ATTO FastStream collects various metrics to
measure performance for physical drives attached to
the FastStream during normal system operation and
drive initialization and verification.
CAUTIONCAUTION
New performance data is updated every 60
seconds which impacts performance
slightly, even if you minimize the browser
window. Exit the ExpressNAV Storage
Manager completely whenever you need
maximum performance.
Health and Status Monitor page
The Health and Status Monitor page is the first
page you see when you open the ExpressNAV
Storage Manager after completing the configuration of
at least one RAID group. You may return to it at any
time by clicking on the
Monitor button on the left hand
side of the screen.
1 If you are not already in the ExpressNAV
Storage Manager, type the IP address of your
appliance in a standard browser as found in
Using the ExpressNAV Storage Manager
on
page 27, click
Enter Here, type in your user
name and password, and click
OK.
2The
Health and Status Monitor page appears.
If you click
Details, added information about
each parameter appears on the
Configuration
Display
page (refer to Configuration Display
page on page 18).