Specifications

16
displayed at the top of each screen. You may
find this useful if you are managing multiple
ATTO devices from a single workstation.
Refer to Discovering, managing other ATTO
devices below.
•
Time and date: use a remote time server to
set the time and time zone, or manually set
the time and date. Refer to Date, Time,
TimeZone and SNTP in Appendix A, CLI
Provides an ASCII-based Interface.
•
Fibre Channel: change the data rate or the
connection mode for each FC port. Refer to
FCDataRate and FCConnMode in
Appendix A
.
•
Assign a hard address. Refer to FC Hard
and FCHardAddress in Appendix A
.
•
Establish Access through FC Ports:
change whether you want all drives to be
available to both ports, creating one node
name for both ports, or if you want different
node names for each port.
•
Ethernet management port: change
whether or not you use DHCP for an IP
address, subnet mask and gateway, or
manually change these parameters and set a
DNS server address. Refer to IPDHCP
in
Appendix A.
7 When you have completed your changes, click
on
Commit.
Discovering, managing other ATTO devices
If you have other ATTO devices in the same broadcast
domain with no routers between them, and any
switches between this FastStream and the other
devices are configured to forward UDP broadcast
messages, you may physically identify these devices
and manage them from within the browser you are
currently using.
1 If you are not already in the ExpressNAV
Storage Manager, type the IP address of your
appliance in a standard browser as found in
Using the ExpressNAV Storage Manager
on
page 27, click
Enter Here, type in your user
name and password, and click
OK.
2The
Monitor page appears. In the left-hand
menu, click on the
Manage menu item on the
left side of the screen.
3 Click on the
Other Devices arrow.
4 Click on the
Find ATTO Devices button
5 Click
Next
6 Click on the Rescan button
7 Select a device from the list. An arrow points to
the appliance you are currently using.
8 Press the
Identify button to activate a blinking
LED on the selected product. Click on the listed
device again to stop the blinking LED.
9 Click on the device from the list and click on the
Launch in Browser button to view the device's
management console.
Creating a unique name for your
FastStream
You may wish to name your FastStream if you are
going to manage several ATTO devices from one
browser.
1 Follow steps 1-3 above.
2 In the
Other Devices menu, click on Set
Appliance Name.
3 Click on Next.
4The System Configuration page appears.
Type in a name for your appliance in the text
box provided.
5 Click
Commit. The name you typed appears in
the upper right corner of the screen under the
ATTO FastStream SC banner.