Instruction manual

6
Internet Explorer setup
1 Open your browser
2Select Internet Options.
3 In the Internet Options screen, select the
Security tab.
4 Click on the Trusted Sites icon.
5 Click on the Sites button.
6 In the text box Add this Web site to the zone,
add the IP address of the appliance. You may
use wild cards.
7 Click on Add
8 Uncheck the Require server verification
check box.
9 Click OK.
10 At the bottom of the Internet Options box, click
on OK and close the box.
Begin initial configuration
1 The ExpressNAV interface welcome screen
appears. Click on Enter Here
2 Type in the user name and password.
Note
The default values are user name root and
password
Password . The user name is case
insensitive and the password is case
sensitive.It is best practice to change the
default user name and password. Refer to
Change current user name, password on
page 15.
Exhibit 2.0-1 Brackets to install the FastStream SC 5300 into a rack.
Exhibit 2.0-2 Connectors, LEDs and power receptacle
Ready/Fault LED
Ethernet port
Fibre Channel ports
SCSI ports
S C S I a ctivity L E D s
F C activity & link LE D s
Serial port
P ow e r recep tacle
air vents
Reset