iSCSI Bridge Specification Sheet
Rev 2/08
©2008 ATTO Technology, Inc. Specifications subject to change without notice
Technical Specification
Power Behind the Storage
For More Information:
www.ATTOTech.com
or to Purchase:
www.ATTOStore.com
(716) 691-1999
Gigabit Ethernet and SCSI
Gigabit Ethernet Interface
• Four independent 100/1000 Gig-E RJ45 Ethernet ports
• Supports IP v.4
• Compliance with IEEE802.3ab Gig-E
• Supports Microsoft iSCSI Initiator
SCSI Interface
• Dual independent Ultra320 LVD/SE SCSI bus ports
• Backwards compatible with all single-ended SCSI devices
Management Interface
• RJ-45 connector for Ethernet management port
• RS-232 serial header console port
Management
Operating Environment
• Operating system independent
• Supports all SCSI devices including hard disk drives, tape drives, RAID controller, DVD, MO and CD libraries
Local and Network Management
• ExpressNAV
TM
web-based management console for remote configuration, management and diagnostic
capabilities
• Local diagnostics supported through CLI, SNMP, Telnet, FTP and SCSI Enclosure Services (SES)
• Command line and menu-based ASCII text management access via Ethernet management port
Agency Approvals (Pending)
Safety and Environmental
• RoHS Compliant
Environmental & Physical Specifications
Dimensions
• 6.193” W X 6.375” L
Operating Environment
• Temperature: 5-40° C
• Humidity: 10-90% non-condensing
Storage Environment
• Temperature: -40°-70° C
• Humidity: 5 - 95% non-condensing
Power
• 5.0A @ 3.3V
Airflow
• 11 CFM recommended
• Ambient air not to exceed 40° C
Ordering Information
Model Number
• IPBR-2600-CR0
Accessories
• Cables: CBL-0911-R01
iPBridge
TM
2600C
iPBridge
TM
2600C