Installation manual

92
3.0 ATTO Utilities for Windows
The ATTO Utilities for Windows is a collection of programs which provide adapter management, device
management and SAN management. These utilities execute on the Windows Server 2012, 2008, 2003, 2000; 8,
7, Vista and XP operating systems for x86 and x64 platforms.
The ATTO Utilities for Windows are included in the CD
which was delivered with your adapter.
The suite content varies according to the adapter
purchased. The Fibre Channel specific utilities are not
present in the SCSI suite and the SCSI specific utilities
are not present in the FC suite.
An easy-to-use HTML-based menu is launched
automatically upon inserting the CD in your system
CD-ROM drive. The adapter tools can be installed
from this menu.
ConfigTools
ATTO provides a full suite of ConfigTools and
supplemental utilities to enhance the performance of
ATTO storage controllers. The suite is comprised of
the following utilities.
Alamode configures disk mode pages.
Bench32, a disk benchmark program, measures disk
performance.
SNIA FC AP installs the ATTO Vendor library needed
to access the SNIA metrics for ATTO FC adapters.
FC LUN Masking selects devices on a SAN visible to
the system.
SCSI Domain Validation tests the connection
between an adapter and the devices on the SCSI bus.
ExpressPCI Setup Utility sets up the NVRAM
parameters for SCSI ExpressPCI adapters.