Installation manual

89 ATTO Technology Inc. ATTO Utilities Installation and Operation Manual
1 Type a RAID group name. The name must be
unique and no more than 14 characters.
2 Select a RAID Level: 0,1,4,5,6,10 or JBOD.
3 Select an Interleave: 8KB, 16KB, 32KB, 64KB,
128KB, 256KB, 512KB, or 1MB
4 Select a Sector Size: 512 B or 4KB.
5 Select an Initialize type: Express or Advanced
6 Select a Partitioning Scheme: Single, By Count
or By Size.
7 Select a Mirror Count, a copy of the original
data stored on a separate disk, for RAID groups
that have mirrors.
8 Type Insert on the Drive list box to add drives to
the RAID group. See Exhibit 2.4-9.
Exhibit 2.4-9 Select Drives for RAID Group Menu
9 A list box of available drives is displayed. Press
the Space Bar to select the drives to include in
the new RAID group. Press E to select drives
that are in the same enclosure. Type Enter to
finalize drive selection. See Exhibit 2.4-10 on
page 90.