Installation manual

85 ATTO Technology Inc. ATTO Utilities Installation and Operation Manual
Exhibit 2.4-4 The Display Drive List Menu
The Display Drive List menu highlights the first drive in the list. Use the up and down arrows to highlight other
disks. Select the following functions from this menu:
Select Drive
Type Space Bar to allow multiple drives to be selected.
The selected is removed by typing
Space Bar a second
time.
Enclosure
Type E to select all disks that are in the same enclosure.
Scan
Type S to clear and refresh the drive list.
Clean
Type C to clean all metadata from the selected drives.
Drives must be selected by typing
Space Bar or E .
Hot Spare
Type H to assign the selected drives to the Hot Spare
pool. Drives must be selected by typing
Space Bar or E .
Remove Spare
Type R to remove the selected drives from the Hot Spare
pool. Drives must be selected by typing
Space Bar or E .
Locate
Type L to make the selected drives blink their activity or
location lights. Drives must be selected by typing
Space
Bar
or E . Type L again to turn the lights off.
Show Drive Detail
Type Enter to display more information about the
highlighted drive. See Exhibit 2.4-5 on page 86.