Installation manual

4
Using the ATTO ConfigTool
To use the ATTO ConfigTool, locate and double-click
the application icon. The main page has three
windows:
Device Listing , Configuration Options
and
Status . See Exhibit 1.0-1 . The Device Listing
window at the left of the display page lists local and
remote hosts found on the network, as well as
currently connected devices. You are required to login
to manage any host. Once you login, the
device tree
will expand to reveal additional details on connected
storage controllers.
The
Configuration Options window in the right
window provides information and options for a device
highlighted in the device listing. If you highlight a
device in the
Device Listing , tabs and panels display
for that device. The following chart lists the tabs
displayed for each device type in the device listing
tree.
The
Status window provides general information
about host and storage controller settings.
Exhibit 1.0-1 The ATTO ConfigTool opening page.
Tree node Tabs displayed
Network Host Tab
Host Basic Info, Notifications, SNMP
Storage
Controller
Basic Info, Flash, RAID, RAID CLI,
Tasks
Channel Basic Info, NVRAM
Devices Basic Info, Flash, SES