Installation manual

82
ExpressSAS EFI Utility
The EFI driver for ATTO ExpressSAS storage controllers has a built-in EFI Utility which manages the adapter and
the devices connected to the adapter.
The ExpressSAS EFI Utility uses a standard menu/choice model. The Main Menu presents functions available
from the utility. Selecting an item on the menu may bring up a secondary menu or a dialog box. The dialog box
displays the items managed by that dialog box. See Exhibit 2.4-2.
The SAS EFI Configuration Utility Main Menu displays
the following items:
1 Configure Adapter Settings (refer to
Configuring Adapter Settings
on page 83)
2 Display Drive List (Refer to Displaying the Drive
List (ExpressSAS RAID adapter only) on page
84)
3 Configure RAID Groups (Refer to Configuring
RAID groups (ExpressSAS RAID adapter only)
on page 86)
4 Exit
Exhibit 2.4-2 The ExpressSAS RAID Main Menu