Installation manual

35 ATTO Technology Inc. ATTO Utilities Installation and Operation Manual
Starting a Media Scan
1 Select the ExpressSAS RAID or
ThunderStream SC storage controller from the
Device Listing panel.
2 Select the RAID tab in the right panel.
3 Select the RAID group, Hot Spare drive(s) or
unallocated drive(s) which will have a Media
Scan. One RAID group can be selected or
multiple Hot Spare and unallocated drives can
be selected.
4 Select the RAID Management menu item at
the top of the screen.
5 Select the Scanning menu item.
6 Select the Media Scan or Parity Verify
from the sub-menu.
7 The Media Scan starts as soon as the sub-
menu item is selected.