Installation manual

30
• Use the Refresh button to query the drive
for the latest values. If any values are
different from the most recent record, a new
record is created and displays.
Note
If you click on the Refresh button when
monitoring is disabled, a pop-up box
displays. You can enable monitoring from
the pop-up box to complete the refresh
request.
Exhibit 1.4.1--11 S.M.A.R.T. status for a selected drive.
Filtering S.M.A.R.T. Attributes
Each of the S.M.A.R.T. status attributes is assigned
one or more classification types:
• Performance
• Error Rate
• Event Count
• Critical
The S.M.A.R.T. Status dialog box can be filtered to
display any combination of these types.
The default view is to display all types.
1 Open the S.M.A.R.T. Status box as described
above.
2 Right click in the table area where the attribute
values are displayed.
3 Each classification type that is visible has a
check mark. (See Exhibit 1.5.1--12
). Select any
classification type to change the check mark.