Installation manual

28
Monitoring Health
The ATTO SAS/SATA RAID storage controller
performs
Enclosure Health Monitoring automatically
when an SES device is present. The RAID storage
controller monitors the status of the enclosure’s power
supplies, fans and temperatures. If the status of any of
these sub-systems indicates a failure, the storage
controller reports the problem.
The ConfigTool shows the status of selected SES
devices and reports the specific health of each sub-
system.
1 Select the SES device from the Device Listing
tree in the ConfigTool.
2 Select the SES tab at the top of the right panel.
3 View the overall status of each component
across the top of the right panel. (See
Exhibit 1.5.1--10
.)
4 Select a specific sub-system (power supply,
fans and temperatures) and view the status of
the reporting sub-system.
Exhibit 1.4.1--10 The SES tab.