Installation manual

97 ATTO Technology Inc. ATTO Utilities Installation and Operation Manual
Saving and applying your changes
1 Click the Save Changes button on the bottom
of the windows.
Note
You must have Write Access to the registry
key and all its sub-keys to save changes.
Consult your system administrator if you
cannot save changes.
2 If you want the changes to take effect
immediately, click the Apply Changes button
before exiting but after saving. This causes the
driver to reread the registry settings and alter its
internal device database.
Note
If Windows is unable to see devices or LUNs
which you have just unmasked, you may
need to reboot the system.
In Windows 2000, you may need to run
Windows Volume Manager to see
devices which you have just unmasked.
Exhibit 3.3-1 ATTO LUN Masking Utility page.