Installation manual

95 ATTO Technology Inc. ATTO Utilities Installation and Operation Manual
• Stripe Group: If the test drive is a stripe group,
select its name from the list box. The names and
quantities of drives in the stripe group are
printed to the Description box. Select Clear to
clear the contents of the Description box.
• Controlled by displays all ATTO storage
controllers on the system.
• Description: Enter additional information about
the test which can be saved or printed. Be sure
to enter additional information after making a
selection from the Stripe Group dropdown box,
as this erases the current description.
Performing multiple benchmark tests
The ATTO Disk Bench supports four command line
parameters for uninterrupted testing:
testfile opens and executes the test named testfile
with the extension
.bmk or .tst (older versions of Disk
Bench
).
textfile opens the text file named textfile. This file
contains a list of test file names which have an
extension of
.bmk or .tst . Each test in this list is
opened and executed in order. Stopping one test in the
list prevents further tests from being executed. Error
logging is the same as the command line parameter
testfile , but all errors generated from all tests in the
list are logged to one file:
textfile.log .
/p testfile: Same as testfile , only the test is printed
to the default system printer instead of being
executed.
/p textfile: Same as textfile , only the tests in the list
are printed to the default system printer instead of
being executed.
Exhibit 3.2-1 The Bench 32 window before and after a test has been run.