Setup guide

Version 3.3 Upgrade Notes
44
11. Click OK. The software updates install. A progress bar at the bottom
of the Software Update window shows the installation progress for
each software update.
12. Close the Software Updates window. A message box appears stating
“You have not installed some updates.”
13. Click Quit. The Software Updates window closes.
14. Close all opens windows.
15. Reboot the Mac OS X client.
Installing the ATTO Configuration Tool
The ATTO Configuration Tool allows you to:
• Upgrade the driver required for the ATTO 3300 Fibre Channel adapter
board in Mac OS X clients.
• Upgrade the firmware on the ATTO Fibre Channel adapter board.
• Display adapter specific settings.
• Display connected devices.
To install the ATTO Configuration Tool:
1. Insert the MediaNetwork CD-ROM into the Macintosh client
CD-ROM drive.
2. Disconnect the Fibre Channel cable from the ATTO Fibre Channel
adapter board in the Mac OS X client.
3. On the MediaNetwork CD-ROM, navigate to
Drivers_Firmware_Mac:HostBusAdapters:ATTO:Utilities:OSX
4. Double-click EPCICfg.app. The ATTO ExpressPCI Configuration
Tool window opens.
5. Click the lock at the bottom of the window to make changes and type a
user name and password that has Administrator permissions in the
Authenticate Window.
6. Click OK. The Introduction screen appears.
7. Click Next. The License screen appears.
0578801A_UP.fm Page 44 Tuesday, May 6, 2003 4:47 PM