Setup guide

Version 3.3 Upgrade Notes
26
3. On the InstallShield Wizard Complete screen, select the “Yes, I want to
restart my computer now” option.
4. Click Finish to complete the installation of the Windows client
software and to reboot the client.
5. After the client reboots, log in as Administrator.
6. Click the Start button, and select Programs > Avid Unity >
Administration. The Administration Tool opens.
7. Select Help > About Administration Tool. The About dialog box
opens. The version number appears at the bottom of the dialog box. It
should read Administration Tool v3.3.
Upgrading the Fibre Channel Adapter Board
If your Windows Fibre Channel client has an ATTO ExpressPCI-FC 3300
adapter board, you need to update the firmware and drivers for the adapter
board. The following sections describe how to identify the Fibre Channel
adapter board and update the firmware and drivers.
To determine if your Windows Fibre Channel client has an ATTO Fibre
Channel adapter board:
1. Move to the back of the client.
2. Locate the Fibre Channel adapter board. You might need to refer to the
workstation’s setup guide to determine which expansion slot contains
the adapter board.
3. To identify the Fibre Channel adapter board:
t If the adapter board has a copper cable with a DB-9 connector or
an optical cable with a large SC connector attached, you have an
Emulex
™
Fibre Channel adapter board. Continue with “Upgrading
the Emulex Fibre Channel Driver” on page 27.
t If the adapter board has an optical cable with a small LC connector
attached, you have an ATTO Fibre Channel adapter board.
Continue with “Installing the ATTO Configuration Utility” on
page 30.
0578801A_UP.fm Page 26 Tuesday, May 6, 2003 4:47 PM