Product specifications

Upgrade Instructions
28
Removing the Top Cover
To remove the top cover on either of the Avid PCI Extenders:
1. Locate a Phillips screwdriver.
2. Unscrew the screws that hold the cover to the chassis. Place the screws
in a safe location, as you will need them to reinstall the cover.
3. Lift the cover off the chassis.
Removing the Fan Assembly (Avid PCI Extender 1)
To remove the fan assembly from the Avid PCI Extender 1 chassis:
w
Make sure the power cord is unplugged from the rear of the Avid PCI
Extender.
1. Unplug the fan plug from the power harness (see Figure 11).
2. Remove the two screws that hold the crossbracket to the chassis.
3. Lift the fan assembly from the chassis.
Figure 11 Removing the Fan Assembly
Fan plug
Screw
Screw