Product specifications

Upgrade Instructions
20
To remove the old Meridien 3D effects daughter board from the digital
media board:
1. Place the board set on an antistatic bag on your lap, with the daughter
board facing down (see Figure 4).
Figure 4 Removing the Daughter Board
2. Place your finger between the two boards next to a plastic standoff
(see Figure 4). Using the blunt end of the pen (not the writing point of
the pen), cover the plastic standoff and carefully push down. Do this
for all five plastic standoffs, until you feel each connection loosen.
3. Turn the board over. Using the ejector handles on the digital media
board, release the two cables that connect the daughter board to the
digital media board (see Figure 5).
Figure 5 Daughter Board Cable Connections
Meridien digital
media board
Ejector handles
Connector under
this location
PCI end
Cables