Product specifications

Upgrade Instructions
10
5. Click the 3D effects board set in the left pane and the right pane
defines the 3D effects board being used and the type of 3D effects
daughter board attached.
n
Note the part number and not just the name.
The following boards and their part numbers are listed below:
- Genie — PN 0030-00254-01 (3D effects board, to be changed to
the new Z6 board).
- Copperhead Lite — PN 0030-03063-01; this is a Meridien III 3D
effects daughter board used for Avid Composer Products and
Avid Xpress systems.
n
The Copperhead Lite board might say Copperhead; you must check the
part numbers. The new Meridien III-U 3D effects daughter board
(Copperhead board PN 0030-03046-01) is used only for Avid Symphony
systems.
- Rattlesnake — PN 0030-03015-01; this is a Meridien II 3D
effects daughter board. This is an older 3D effects daughter board
only supported for Avid Xpress systems.
6. Click the display controller board in the left pane. If the right pane says
“No information available,” then you have the EDC4 display controller
board. If any board information is available, you have the older board
and it needs to be upgraded to the EDC4 display controller board.