Setup guide

Appendix A Nearchive Hardware Specifications and Notices
74
Environment
The following table shows the environmental specifications for the Nearchive enclosure.
Electrical
The following table shows the electrical specifications for the Nearchive enclosure.
Power Cords
Select the power cords for the Nearchive enclosure according to the country destination; it
must comply with local safety requirements.
w
The power cords are the Nearchive enclosure power disconnect device, and if rack
mounting renders the power cords inaccessible, then the rack must provide a means to
disconnect power.
w
The Power switch on the front of the Nearchive enclosure is a “standby” switch only. It
does not disconnect power from the components inside the Nearchive enclosure. If you
need to service the Nearchive enclosure, disconnect both power cords before beginning
the service operation.
Environmental Specifications
Component
Operating
Temperature
Operating
Humidity
Storage
Temperature
Storage
Humidity
Nearchive
enclosure
40°F to 95°F
(4°C to 35°C)
10% to 80%
noncondensing
-40°F to 158°F
(-40°C to 70°C)
5% to 95%
noncondensing
Electrical Specifications
Component Voltage Frequency
Watts
(Max. U.S.)
Nearchive enclosure 115 to 230 V ac 50 to 60 Hz 460 W