Setup guide

Chapter 3 Configuring Nearchive Drives and Software
60
3. In the Workgroup name text box, type a name for the Nearchive.
Do not use the Nearchive host name.
4. In the Maps To Server Name text box, type the Nearchive hostname.
5. Click OK.
Setting Up E-mail Notification
You can set up E-mail notification on both the Nearchive Base Server and the Nearchive
Storage System. The E-mail message contains the same information found on the 3DM
Alarm display. For example, you are notified if problems occur on the disk arrays that
require attention. See the 3DM Help for more information.
n
Each Nearchive Storage System must be ethernet-connected for e-mail notification to work.
To set up E-mail notification:
1. Double-click the 3DM desktop icon.
2. Click Settings.
3. Select Enabled.
4. Fill in the following fields:
- Sender (the Base Server or Storage System name)
- Recipient (administrator’s e-mail)
- Server (your network mail server)
5. Click Save E-mail Settings.
6. Send a test message to verify that e-mail notification works.
Installing the IIS Lockdown Tool
The Microsoft Internet Information Services (IIS) Lockdown tool is an optional software
package that improves the security on the system running the Nearchive application. It
closes unused doors that hackers could exploit. The tool does not affect the Nearchive
application in any way. It is not necessary to run this tool on new Nearchive servers, as that
task is performed at the factory.
n
If the Nearchive system is currently running the IIS Lockdown tool, it is not necessary to
install v2.1. If you want to install IIS Lockdown v2.1, you need to run the original IIS
Lockdown tool to unlock the previous settings, then reinstall the Nearchive software, and
then install and run IIS Lockdown v2.1.