Setup guide

Rearranging Drive Letters
41
6. Do one of the following:
t For Nearchive Base server, select FlashBundle_2005_08_09.24XL.
t For Nearchive Storage server, select FlashBundle_2005_08_09.zip.
7. Click Open.
8. Click Update and follow the prompts to update the firmware.
Rearranging Drive Letters
Verify that Disk 0 contains partitions C and D. The internal drive should be C and D, and the
DVD drive should be Z.
To rearrange disk lettering:
1. Right-click the My Computer icon on the desktop, and select Manage. The Computer
Management window opens.
2. Select Disk Management.
3. Right-click on a drive listed in the lower right pane of the window, and select Change
Drive Letter and Path from the list. The Select Drive Letter and Paths for (X:) window
opens. (X:) being the current drive letter of the drive selected.
4. Click Edit. The Edit Drive Letter or Path window opens.
5. Select the drive letter you want to use from the pull-down list. The Confirm window
opens asking: “Changing the drive letter of a volume may cause programs to no longer
run. Are you sure you want to change this drive letter?”
6. Click Yes. The drive letter is changed.
7. Close the Computer Management window.
Setting Up the E Drive for SQL
Set up drive E with 50 GB of storage space for SQL Server 2000.
n
You must configure your disks as Dynamic disk drives for this release.
To set up drive E for SQL:
1. Right-click Disk 1 and select Upgrade to dynamic disk.
The Upgrade to Dynamic Disk dialog box appears.
2. Select Disk 1, Disk 2, Disk 3, and Disk 4.
3. If you have a Nearchive Storage system, check those drives also.