Setup guide

Chapter 3 Configuring Nearchive Drives and Software
40
3. Do one of the following:
t For Nearchive Base server, select the Celerity FC-24XL card.
t For Nearchive Storage server, select the Celerity FC-41XS card.
4. Click the Flash tab.
The following illustration shows the ATTO Configuration tool with the Flash tab open
on the Nearchive Base server.
The correct Flash version is 2.13.
- If your version is 2.13, the firmware for this card does not have to be updated.
- If the version is not 2.13, proceed to the next step.
5. Click the Browse button and browse to the following directory:
D:\Drivers and Installers\ATTO\Flash