Setup guide

Configuring the Nearchive Storage System Using Windows 2000 Setup
33
14. Click the “Automatically adjust clock for daylight saving changes” check box if your
location observes daylight saving time.
15. Click Next. The Network Settings screen appears.
16. Click Typical. The network settings are site dependent.
17. Click Next. The Workgroup and Computer Domain screen appears.
18. Click No. The workgroup and domain settings are site dependent. The Performing Final
Tasks screen appears, followed by the Complete the Windows 2000 Setup Wizard
screen.
19. Click Finish. The Windows 2000 operating system is loaded.
Your Nearchive Storage System hardware installation is complete. Continue with
“Nearchive RAID Configuration” on page 39 to configure the Nearchive Storage System.