Setup guide

Configuring the Nearchive Base Server Using Windows 2000 Setup
31
7. Click Next. The Your Product Key screen appears.
8. Type the Product Key from the Certificate of Authenticity in the Product key text box.
The certificate might be on the back of the Windows 2000 Server Getting Started Guide
in the Windows software kit, or it might be affixed to the Nearchive Base Server.
If the certificate is not already affixed to the Nearchive Base Server, remove it from the
Windows 2000 Server Getting Started Guide and affix it now.
9. Click Next. The License Modes screen appears.
10. Click Per Server and set the number of concurrent connections to 5.
11. Click Next. The Computer Name and Administrator Password screen appears.
12. Type the name you want to use for the Nearchive Base Server in the Computer name
text box.
n
Avid recommends using an administrator password to prevent unauthorized use of the
Administrator account.
13. Type the password you want to use for the Administrator account in the Administrator
Password text box.
14. Confirm the password by retyping the password in the Confirm Password text box.
15. Click Next. The Date and Time Settings screen appears. Set the correct date, time, and
time zone for the Nearchive Base Server.
16. Click the “Automatically adjust clock for daylight saving changes” check box if your
location observes daylight saving time.
17. Click Next. The Networking Settings screen appears.
18. Click Typical. The network settings are site dependent and will be set later during the
Nearchive Base Server configuration in Chapter 3.
19. Click Next. The Workgroup and Computer Domain screen appears.
20. Click No. The workgroup and domain settings are site dependent and will be set later
during the Nearchive Base Server configuration in Chapter 3. The Performing Final
Tasks screen appears, followed by the Complete the Windows 2000 Setup Wizard
screen.
21. Click Finish. The Windows 2000 operating system is loaded.
Your Nearchive Base Server hardware installation is complete. Continue with Chapter 3 to
configure the Nearchive Base Server and to install the Nearchive software.