Setup guide

Chapter 2 Installing Nearchive Hardware
26
• The rails attach as far forward on the Nearchive enclosure as possible.
Aligning the Nearchive Rails to the Rack
Mounting a Nearchive Enclosure
w
Mounting the Nearchive enclosure on the rack-mount rails is a two-person task. It is
heavy and fits tightly into the rack rails; the rails might need to be spread slightly to fit
the Nearchive enclosure. If you try to mount the Nearchive enclosure alone, you might
damage the Nearchive enclosure or injure yourself.
To mount the Nearchive enclosure on the rack-mount rails:
1. Slide the rack-mount rails out of the rack.
2. Lift the Nearchive enclosure into position with one person on each side of the rack.
3. Place the rail slides on the Nearchive enclosure onto the extended rails.
4. Slide the Nearchive enclosure into the rack. You should hear the slides click onto the
rails as you push the Nearchive enclosure into the rack.
5. Attach the keyboard, monitor, and mouse to the Nearchive enclosure using the following
procedure.
Baseline of Nearchive
enclosure is at
U-alignment position
between two 1/2-inch
spaced holes.
Rack channel hole spacing
Rack front channel
EIA rack unit
Support rail
1 3/4 in
1/2 in
5/8 in
5/8 in
1/2 in
5/8 in
5/8 in
1/2 in
1 3/4 in
1 U
2 U