Diamond Storage Array Installation, Operations, Maintenance Manual
Table Of Contents
- Preface
- 1.0 Diamond Storage Array Product Overview
- 2.0 Diamond Storage Array Technical Overview
- 3.0 Installation Instructions
- 3.2 Physical Set Up
- 4.0 Determining Drive and Sled Designations
- 5.0 Accessing the Array
- Command Line Interface
- ATTO ExpressNAV
- In-band SCSI over Fibre Channel
- RS-232 port
- Ethernet port
- SNMP
- I/O details
- Browser compatibility
- Opening an ExpressNAV session
- Navigating ExpressNAV
- Exhibit 5.4-1 Atypical page in the ATTO ExpressNAV configuration tool.
- Status
- Ethernet
- SNMP
- Serial Port
- Fibre Channel
- Storage Management
- RAID
- Clear Data
- Logical Units
- Rebuild
- Configuration
- Advanced
- Restart
- Help
- FirmwareRestart
- Help
- RestoreConfiguration
- SaveConfiguration
- SystemSN
- VerboseMode
- EthernetSpeed
- FTPPassword
- IPAddress
- IPDHCP
- IPGateway
- IPSubnetMask
- SNMPTrapAddress
- SNMPTraps
- SNMPUpdates
- TelnetPassword
- TelnetTimeout
- TelnetUsername
- FcConnMode
- FcDataRate
- FcFairArb
- FcFrameLength
- FcFullDuplex
- FcHard
- FcHardAddress
- FcNodeName
- FcPortInfo
- FcPortList
- FcPortName
- FcWWName
- SerialPortBaudRate
- SerialPortEcho
- SerialPortHandshake
- SerialPortStopBits
- AudibleAlarm
- DiamondModel
- DiamondName
- DriveCopyStatus
- DriveInfo
- FcNodeName
- FcPortList
- FcPortName
- Help
- IdentifyDiamond
- Info
- LUNInfo
- SerialNumber
- SledFaultLED
- SMARTData
- Temperature
- VirtualDriveInfo
- FcScsiBusyStatus
- FirmwareRestart
- MaxEnclTempAlrm
- MinEnclTempAlrm
- Temperature
- Zmodem
- ATADiskState
- AutoRebuild
- ClearDiskReservedAreaData
- DriveCopy
- DriveCopyHalt
- DriveCopyResume
- DriveCopyStatus
- DriveInfo
- DriveSledPower
- DriveWipe
- IdeTransferRate
- LUNInfo
- LUNState
- QuickRAID0
- QuickRAID1
- QuickRAID5
- QuickRAID10
- RAID5ClearData
- RAID5ClearDataStatus
- RAIDInterleave
- RAIDHaltRebuild
- RAIDManualRebuild
- RAIDRebuildState
- RAIDRebuildStatus
- RAIDResumeRebuild
- RebuildPriority
- ResolveLUNConflicts
- RestoreModePages
- SledFaultLED
- VirtualDriveInfo
- 6.0 Configuring Drives
- JBOD (Just a Bunch of Disks)
- RAID Level 0
- RAID Level 1
- RAID Level 10
- RAID Level 5
- Interleave
- Hot Spare sleds
- Enhancing performance
- Sled-based versus disk-based
- Exhibit 6.2-1 Sled-based QuickRAID0 stripe groups with LUN designations in a fully populated Array set up as QuickRAID0 6 sled. If sled 6 were to be withdrawn from the array, LUN 3 (grayed boxes) would be unavailable.
- Exhibit 6.2-2 Drive-based QuickRAID0 stripe groups with LUN designations in a fully populated Array set up as QuickRAID0 6 Drive. If sled 6 were to be withdrawn from the array, LUNs 2 and 5 would be unavailable.
- Exhibit 6.2-3 Configurations of a fully populated Diamond Storage Array in RAID Level 0.
- Exhibit 6.3-1 Drive sleds, LUNs and mirror partners in a RAID Level 1 configuration.
- Hot Spare sleds
- Configuring a fully-populated array
- Configuring a partially-populated array
- Removing RAID groups
- Hot Spare sleds
- 7.0 Hardware Maintenance
- 8.0 Copying Drives
- 9.0 Updating Firmware
- 10.0 System Monitoring and Reporting
- RS-232 monitoring port and CLI
- Ethernet monitoring port and CLI
- Power On Self Test (POST)
- Ready LED
- Audible alarm
- Thermal monitoring
- Power supply monitoring
- System fault LED and error codes
- Disk drive activity and disk fault LEDs
- Windows 2000 special instructions
- Error messages
- Specific situations and suggestions
- Default
- Factory Default
- Appendix A ATA Disk Technology
- Appendix B Information Commands Results
- Appendix C Product Safety
- Appendix D Specifications
- Appendix E Warranty
iv
Diamond Storage Array Installation and Operation Manual
Midplane[ 01 ] Temperature = 32 C
Midplane[ 02 ] Temperature = 31 C
Max. Enclosure Temp. Alarm = 47 C
Min. Enclosure Temp. Alarm = 5 C
Active Configuration = ATTO
DiamondClass =(V)86
LUNInfo [LUN]
Displays information about all LUNs or detailed information about a specific LUN.
...................
LUNInfo
LUN TYPE State Capacity Errors SerialNumber
=== ==== ===== ======= ==== ============
0 Processor ONLINE 0MB .0
1 JBOD ONLINE 76292MB 0 V80EE4YCXAI0000
2 JBOD ONLINE 76292MB 0 V80EE4HCXAI0000
3 JBOD ONLINE 76292MB 0 V80DTESCXAI0000
4 JBOD ONLINE 76292MB 0 V80DTCWCXAI0000
5 JBOD ONLINE 76292MB 0 V80EE4TCXAI0000
6 JBOD ONLINE 76292MB 0 V80CG4RCXAI0000
7 JBOD ONLINE 76292MB 0 V80D44LCXAI0000
8 JBOD ONLINE 76292MB 0 V80DTCXCXAI0000
9 JBOD ONLINE 76292MB 0 V80DTELCXAI0000
10 JBOD ONLINE 76292MB 0 V80ED9GCXAI0000
11 JBOD ONLINE 76292MB 0 V80CFVHCXAI0000
12 JBOD ONLINE 73307MB 0 YSDYSG9HXAI0000
13 JBOD ONLINE 76292MB 0 V80EE4GCXAI0000
14 JBOD ONLINE 76292MB 0 V80EE5LCXAI0000
15 JBOD ONLINE 76292MB 0 V80DTDTCXAI0000
16 JBOD ONLINE 76292MB 0 V80DTDLCXAI0000
17 JBOD ONLINE 76292MB 0 V80EE4PCXAI0000
18 JBOD ONLINE 76292MB 0 V80CLN4CXAI0000
19 JBOD ONLINE 76292MB 0 V80D15GCXAI0000
20 JBOD ONLINE 76292MB 0 V80DTDRCXAI0000
21 JBOD ONLINE 76292MB 0 V80DTDYCXAI0000
22 JBOD ONLINE 76292MB 0 V80EE5ECXAI0000
23 JBOD ONLINE 76292MB 0 V80CG2GCXAI0000
24 JBOD ONLINE 73307MB 0 YSDYSG9MXAI0000
LunInfo 13
ATADisk
SerialNumber V80EE4GC XAI0000
Sled = 1, Drive = 2
Drive Model: Maxtor 98196H8
S/N: V80EE4GCXAI0000 F/W Rev: ZAH814Y0 ATA Rev: 007e
Capacity: 76292 MB (09502790 blocks)
PIO: 03 MDMA: 07 UDMA: 07 QD: 00 CMDSet: 7c69 4309
Operations Blocks
Read 00000000 00000000
Write 00000000 00000000
Errors 00000000
LUNinfo for RAID0 6
LUN TYPE State Capacity Errors SerialNumber
=== ==== ===== ======== ==== ============
0 Processor ONLINE 0MB ...0
1 RAID0 ONLINE 305171MB 0 V80EE4YC0AJ0000
2 RAID0 ONLINE 305171MB 0 V80DTESC0AJ0000