- ATTO Technology, Inc. Installation and Operation Manual
Table Of Contents
- 1 ATTO provides Fibre Channel solutions
- 2 Fibre Channel is a key technology for storage
- 3 Hardware installation
- 4 Configuring and updating drivers
- 5 Updating hardware flash
- 6 Troubleshooting
- Appendix A Standards and compliances
- Appendix B Accessories
- Appendix C SCSI adapter selection guide
- Appendix D Contact ATTO Technology, Inc.
ii
Usage restrictions
The use of optical instruments with this product will increase eye hazard.
The multimode transceiver is a Class 1 laser product complying with IEC 825-1 and FDA-21 CFR
1040.11. To meet laser safety requirements, the transceiver shall be operated within the maximum
ratings. The laser is non-OFC compliant as it is a Class 1 device.
The optical ports of the modules must be terminated with an optical connector or with a dust plug.
CAUTIONCAUTION
Failure to adhere to the above restrictions could result in a modification that is considered an act of
“manufacturing” and will require, under law, recertification of the modified product with the U.S. Food
and Drug Administration (ref. 21 CFR 1040.10(i)).