Specifications

23
ATTO FibreCenter 3400
Ins
tallation and Operation Manual
6 Updating firmware
The Linux Kernel and the Flash File System may be updated by accessing the FibreCenter 3400R/D
through an Ethernet network using Telnet or an additional graphical user interface program.
A graphical user interface may be installed on a
host computer to update the FibreCenter 3400R/D
firmware. You must have Java™ installed on the
host computer which you can download from
java.sun.com/getjava
.
1 Attach the FibreCenter 3400R/D to an
Ethernet network.
2 Configure the FibreCenter for Ethernet
access.
3 Download the software (a .jar file) for the
FibreCenter 3400R/D update program from
the ATTO Technology, Inc. web site at
www.attotech.com
. The file may be placed
on your desktop or in a folder.
4 Start the application by clicking on the .jar
file.
5 The screen shown in Exhibit 6-1 will appear.
Fill in the
IP address
of the device to update.
6 Choose to update the Flash File System,
Kernel or both.
7 Press the
Update
button.
8 Do not interrupt the flash process. Do not
power down the host or the FibreCenter
until the display tells you the process has
been completed. Interrupting the flash
process will make your FibreCenter
inoperable and you will have to return it to
ATTO Technology for repair.
Exhibit 6-1 Fill in the IP address of the device to update and choose to update the Flash File System, Kernel or both.
Press the Update button. Do not interrupt the flash process. Do not power down the host or the FibreCenter until the
display says the process has been completed.