Specifications

Managed Data Path Model 20
Zone Restore
Sets the new parameters for each port in the zonelist to the current setting
Actions:
set Zone Restore
Information:
none
Zone Speed
Sets (fixes) the data rate for each zone in the hub. Auto negotiation, the default, means the devices attached to the zone determine the rate, with
the slowest device controlling the rate. You may use this command to fix the rate at 1Gb or 2Gb.
Limits: applies to each port in the zone
Default: auto
Actions:
set Zone Speed [1Gb|2Gb|auto] zonelist
Commit Zone
Information:
get Zone Speed
Example: set Zone Speed 1Gb 1
sets the zone speed to 1 Gb in zone 1
Zone Threshold
Determines the number of transmissions required before a zone is bypassed.
Limits: applies to each port in the zonelist
Actions:
set Zone Threshold <on-count> <off-count> [zonelist]
Information:
get Zone Threshold