Specifications

17
ATTO FibreCenter 3400
Ins
tallation and Operation Manual
4.1 General use commands
Several commands may be invoked at any time.
Commit Zone
Commit all previous zone configuration commands since the most recent
Commit Zone
command. The
Commit Zone
command first turns off all
ports within the configured zone, waits for the amount time designed in
Switch Delay
command (default is 20 microseconds), then implements
the command.
Actions:
Commit Zone
Information:
none
Help
Displays a list of available commands.
Action:
none
Information:
Help
Quit
Exits the current telnet CLI session.
Actions:
Quit
Information:
none
Reset
Performs a “warm boot” including POST and refreshes all configuration settings. All software in Flash memory is reloaded into RAM in
approximately 40 seconds..
Actions:
Reset
Information
: none
Switch Delay
Determines the amount of time before the
Commit Zone
command takes effect in microseconds (µsec).
Limits: 0 to 2 sec (0-2 million microseconds) Default: 20000
Actions:
set Switch delay [0-2000000]
Information:
get Switch Delay
Verbose
Specifies the detail of feedback for the command line interface. Disabling this option removes parameter names from action commands and
removes descriptions from information commands.
Limits: on or off Default: off (returns have parameter information)
Actions:
set Verbose [on|off]
Information:
get Verbose