Specifications

Managed Data Path Model 14
the last mapping designated by the
Set zone
and
Commit Zone
commands.
Example: set up one zone
1 At the Command Line Interface prompt, type
set zone map 1:all
to configure all the ports
on the hub to one zone with default settings.
2 Type
get zone info
.
3 The screen will display the current
parameters and the parameters which will
take effect at the next Commit Zone
command (new parameters). Type
Commit
Zone
for the mapping to take effect.
Example: set up multiple zones
1 At the Command Line Interface prompt, type
set zone map 1:12 2:3456
to configure the
first two ports into one zone, and ports 3, 4,
5, and 6 into a second zone.
2 Type
get zone info
.
3 The screen will display the current
parameters and the parameters which will
take effect at the next Commit Zone
command (new parameters). Type
Commit
Zone
for the mapping to take effect.
Example: change parameters
1 At the Command Line Interface prompt, type
set zone map 1:12 2:34 3:5678
set zone rate 1gb 1
set zone rate 2 gb 2
set zone rate auto 3
2 Type
get zone info
(optional step if you don’t
need verification of what you have done)
3 The screen will display the current
parameters and the parameters which will
take effect at the next Commit Zone
command (new parameters). If the
parameters are what you want, type
Commit
Zone
. If not, type what you want, then
Commit Zone.
Exhibit 3.4-1 Screen display after typing the following commands:
set zone map 1:12 2:34 3:5678
set zone speed 1gb 1
set zone speed 2gb 2
set zone speed auto 3
get zone info
Exhibit 3.4-2 Screen display after typing
Commit Zone
get zone info
current parameters new parameters
port zone attribute spd on off errors zone attribute spd on off
1 0 auto auto 0 0 xxxxx 1 auto 1 GB 0 0
2 0 auto auto 0 0 xxxxx 1 auto 1 GB 0 0
3 0 auto auto 0 0 xxxxx 2 auto 2 GB 0 0
4 0 auto auto 0 0 xxxxx 2 auto 2 GB 0 0
5 0 auto auto 0 0 xxxxx 3 auto auto 0 0
6 0 auto auto 0 0 xxxxx 3 auto auto 0 0
7 0 auto auto 0 0 xxxxx 3 auto auto 0 0
8 0 auto auto 0 0 xxxxx 3 auto auto 0 0
current parameters new parameters
port zone attribute spd on off errors zone attribute spd on off
1 1 auto 1 GB 0 0 xxxxx 1 auto 1 GB 0 0
2 1 auto 1 GB 0 0 xxxxx 1 auto 1 GB 0 0
3 2 auto 2 GB 0 0 xxxxx 2 auto 2 GB 0 0
4 2 auto 2 GB 0 0 xxxxx 2 auto 2 GB 0 0
5 3 auto auto 0 0 xxxxx 3 auto auto 0 0
6 3 auto auto 0 0 xxxxx 3 auto auto 0 0
7 3 auto auto 0 0 xxxxx 3 auto auto 0 0
8 3 auto auto 0 0 xxxxx 3 auto auto 0 0