Setup guide

Chapter 4 Rack Mounting the Avid Nitris DNA Enclosure
64
Attaching Rack Nuts onto the Rack Enclosure
Securing the Avid Nitris DNA in a Rack
The Avid Nitris DNA is secured in the front mounting rails of the rack with four rackmount
screws. If your rack has threaded holes, you might have your own rack screws. If your rack
does not have threaded holes, install the rack nuts included with the Avid Nitris DNA (see
“Attaching the Rack Nuts to the Rack” on page 62).
c
You should have someone helping you to lift the Avid Nitris DNA enclosure.
Rack-nut clip slid
over hole
Rack enclosure
mounting rail