Setup guide

Avid Nitris DNA
41
SD Video I/O Board Connectors
The following figure shows the connections on the SD video I/O board. The following table
describes the function of each connector.
SD Video I/O Board Connectors
All analog video outputs are available during capture and playback to be used as a client
monitor.
6 S/PDIF OUT S/PDIF digital output, red phono (RCA) jack.
7 AES/EBU IN/OUT Channels 1 - 8 AES/EBU digital input and output, 25-pin DSUB-
connector; a color coded DB25 to XLR cable is provided.
8 ADAT IN 8 optical channels input.
9 ADAT OUT 8 optical channels output.
Eight-Channel Audio I/O Board Identifiers (Continued)
Number Label Function
ANALOG IN
ANALOG OUT
SDI DAE LTC
SYSTEM
MONITOR OUT
YSD SYNC PB PR Y
PB PR
IN
CV 1
CV 2
OUT 1
OUT 2 OUT
2
1
IN
CV S-VIDEO
S-VIDEO
11
19
18
13 21
1 2 3 4 5
6
78 9
12
14
15
17
10
16
20
SD Video I/O Board Identifiers
Number Label Function
1 SD SYNC Standard-definition video reference (REF) input for a black burst or
house sync signal, BNC connector.
2 Y, ANALOG IN
(component)
SD analog component video input, Y luma, BNC connector; connects
to the Y video output of decks.
3 PB, ANALOG IN
(component)
SD analog component video input, PB color difference signal, BNC
connector; connects to the B-Y video output of decks.
4 PR, ANALOG IN
(component)
SD analog component video input, PR color difference signal, BNC
connector; connects to R-Y video output of decks.