Setup guide

Chapter 3 Assembling the System
40
Eight-Channel Audio I/O Board Connectors
The following figure shows the connections on the eight-channel audio I/O board. The
following table describes the function of each connector. You select which audio inputs to
use from the Capture tool when inputting.
Eight-Channel Audio I/O Board Connectors
7 PR, HD COMPONENT OUT HD analog component video output, PR color difference signal,
BNC connector; connects to analog video input of a monitor or
waveform /vector.
8 HD TRILEVEL SYNC High-Definition video reference input for tri-level sync.
HD Video I/O Board Identifiers (Continued)
Number Label Function
Eight-Channel Audio I/O Board Identifiers
Number Label Function
1 MIC 1 Microphone (MIC) inputs, two female XLR connectors. The
analog microphone connectors accept powered or 48 V phantom
power microphones. The audio input and microphone are
selected in the software.
2MIC 2
3 ANALOG IN Channels 1 - 8 Professional level audio input, 25-pin
DSUB connector; a color coded DB25 to XLR cable is provided.
— Gain Gain controls for the 8 audio inputs.
4 ANALOG OUT Channels 1 - 8 Professional level audio output, 25-pin
DSUB connector; a color coded DB25 to XLR cable is provided.
— Gain Gain controls for the 8 audio outputs.
5 S/PDIF IN S/PDIF digital input, white phono (RCA) jack.
1 2345678
ANALOG AUDIO IN ANALOG AUDIO OUT
DIGITAL AUDIO
S/P DIF
MIC 1
MIC 2
GAIN
1234567
8
GAIN
IN
IN OUT
OUT
IN/OUT
OPTICAL
AES/EBU
1 2 3 4 5
6
789
Gain adjustments