Specifications
1
ATTO Technology ExpressPCI FC 3300 and FC 3305 Installation and Operation Manual
1 ATTO ExpressPCI provides Fibre Channel solutions
All ATTO ExpressPCI FC models have been designed to ensure interoperability with Fibre Channel
devices and compatibility with a broad range of servers and workstations to meet your needs.
The ATTO ExpressPCI FC 3300 and ExpressPCI
FC 3305 host adapters offer high performance for
your applications. Each conforms to a strict
interpretation of Fibre Channel specifications to
ensure the adapter will work with a variety of
other SAN (Storage Area Network) components.
ExpressPCI FC 3300
The ExpressPCI FC 3300 is a 2-Gigabit Fibre
Channel to PCI-X bus host adapter with one fixed
short wave optical LC connector.
It supports all Fibre Channel topologies, including
point-to-point, arbitrated loop and fabric.
This adapter is capable of automatically sensing
and switching between 1-Gigabit and 2-Gigabit
speeds, allowing you to install the product in
legacy SANs.
Express PCI FC 3305
The ExpressPCI FC 3305 is comparable to the
ExpressPCI FC 3300 host adapter with the
exception of the interconnect style.
It is a 2-Gigabit Fibre Channel to PCI-X bus host
adapter with a fixed, shrouded copper HSSDC
interface capable of supporting all Fibre Channel
topologies, including point-to-point, arbitrated
loop and fabric.
This adapter is capable of sensing and switching
between 1-Gigabit and 2-Gigabit speeds,
allowing you to install the product in legacy
SANs.
Common features
❖
2.125 Gigabit data transfer rates providing
up to 400 MB/sec. throughput in full duplex
mode
❖
Strict adherence to ANSI FC-AL-2, FC-
PLDA, FC-Tape and FC-FLA specifications
❖
Supports point to point, arbitrated loop and
direct fabric/switch attach topologies
❖
Class 2, Class 3 and Intermix support.
❖
ASPI and SCSI Manager 4.3 compatible
❖
Autonegotiate and set between 1-Gigabit
and 2-Gigabit speeds
❖
Multiple initiator support
❖
LEDs for online and fault status
❖
Windows
®
XP/2000/NT; Windows 95/98,
Linux, Sun
®
Solaris and Macintosh
®
OS,
Mac OS X
❖
RAID kits available
❖
SNIA Fibre Channel host adapter API
support
Advanced SCSI support
❖
Supports Advanced Data Streaming
(ADS
TM
) Technology
❖
Supports SCSI-FCP over Fibre Channel
❖
Uses SCSI-3 tagged command queuing
❖
Large command FIFO
❖
Supports disconnect/reconnect
❖
Asynchronous I/O support
❖
Bootable from attached disks
PCI features
❖
PCI 2.2 and PCI 99 compliant
❖
PCI BusMaster rate of 528 MB/sec. in 64-
bit/66 MHz PCI slots
❖
66MHz/64-bit PCI compatible. Backward
compatible to 33MHz and 32-bit PCI
Dimensions
❖
Length: 6.521 inches
❖
Height: 4.2 inches
Environmental & physical specifications
❖
Operating temperature: 0-50
o
C
❖
Humidity:10-90% non-condensing
❖
Airflow: 100 LFM (min.)
PCI Signal Compatibility
❖
3.3 Volts/5 Volts universal
Power Requirements
❖
1A @ 5V