Instruction manual

1.5 ATTO FibreBridge 2400C ......................................................11
Board dimensions
Cooling and airflow
Power
Fibre Channel port
SCSI ports
Ethernet port
Serial management header
LED indicators
2.0 Installing the FibreBridge ................................................................13
Unpack the packing box; verify contents
Install the FibreBridge
Discover the IP address
Internet Explorer setup
Begin initial configuration
3.0 Configuring the FibreBridge ..........................................................15
3.1 Mapping devices ..................................................................17
Fibre Bridge mapping
SCSI device mapping
Use ExpressNAV for mapping devices
Map devices automatically
Map devices manually.
3.2 Optional changes to system configurations .....................19
Change current user name, password
Enhance performance
Create a read only password or user name
4.0 Remote monitoring, management .................................................21
SNMP-based monitoring
E-mail messages provide error notification
5.0 Updating firmware ..........................................................................25
Preliminary steps